MSA White V Gard Slotted Full Brim Hard Hat w FasTrac Suspension
Please call us for Special Corporate Pricing. 1-800-517-5970
V-Gard Protective Caps and Hats from MSA consist of a polyethylene shell and suspension system working together as a protection system. V-Gard headwear features advanced styling in either cap or hat styles, with the cap available in three sizes: small (6 - 7 1/8), standard (6 1/2 - 8) and large (7 - 8 1/2). V-Gard Caps and Hats meet or exceed the applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1 1997,Class E and G.
Features:
Polyethylene shell.
Advanced styling
Fas-Trac® Suspension
Caution:
MSA’s Vanguard Type II protective helmets are so designed and must be used if lateral protection is desired
Do not mix suspension and helmet size. Make sure the sizes match use only MSA suspensions on an MSA caps or hats. Failure to comply will reduce the energy-absorbing ability of the protective hat or cap.
Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death
V-Gard Caps and Hats are not specifically designed to protect against lateral blows from the front, side, or rear
Specification:
Application:
Agriculture
Asbestos Abatement
Chemical
Construction
Domestic Preparedness
Electric Utility
Hazardous Materials
Indoor Air Quality
Medical
Mining
Nuclear
Oil & Gas
Paper & Pulp
Sand Blasting
Sanding & Grinding
Spray Painting
Water/Wastewater
Welding
Specs:
ANSI Type I |
Cap Class E, G |