Cofra 27501-CM0 Asphalt Speedway EH PR Boot
Please call us for Special Corporate Pricing. 1-800-517-5970
The Speedway Asphalt Boots have the unique, totally flat Cofra sole and the speed and ease of a slip on boot. No laces! The flat sole prevents stones, gravel and asphalt from accumulating in the tread. In addition, the flat sole avoids marking or digging into fresh asphalt.
Heat Resistance of the sole tested for 8 hours at 212°F. The PU/Nitrile rubber sole is resistant up to 572°F (1-minute contact).
Midsole: Heat Defender PU, a compound devised to prevent heat from passing through the sole into the shoe. It resists to 302°F for 30 minutes without its chemical-physical features being altered.
Upper: Water repellent Pull-up nubuck
Footbed: THERMIC INSOLE, made of soft and scented polyurethane, anatomic, insulating against high temperatures, covered with cloth. The thermal comfort inside the footwear is granted thanks to the special polyurethane compound devised to give high insulation
Puncture Resistant: Non-metallic APT (Anti Puncture Textile) fabric is flexible and built into the footbed.
TOE CAP: non metallic TOP RETURN. TPU toe cap protection.
- I/C Composite toe
PLATE: non metallic APT PLATE - Zero Perforation with high electric resistance
WIDTH: WIDE
- Puncture Resistant sole
- Heat Resistant sole
- EH - Electrical Hazard compliant
- ASTM F2413-18
- 100% Non Metallic, toe cap protection
*Please refer to chart below for US to European sizing conversion*
|
US |
6 |
6.5 |
7 |
7.5 |
8 |
8.5 |
9 |
9.5 |
10 |
10.5 |
11 |
12 |
13 |
14 |
|
EU |
39 |
39 ½ |
40 |
41 |
41 ½ |
42 |
43 |
43 ½ |
44 |
44 ½ |
45 |
46 |
47 |
48 |
